- Abrasion resistant
- Extremely high heat dissipation
- Protects against corrosion
In general, Gun Kote was developed mainly for use by the United States Navy Seals. After a series of tests, this thin hard coating was able to withstand over 500 hours of salt spray tests and still meet all military requirements. Today, Gun Kote is used in the shooting sports industry to help protect against corrosion and also to add a unique color to firearms.
The 2400 Series can withstand temperatures over 500 degrees F and as low as -320 degrees F. It can be applied to all ferrous and non-ferrous metals as well as plastic. It's also abrasion resistant and has extremely high heat dissipation. Can also be used on magazines. Make sure to strip and clean any parts that Gun Kote will be applied to. Never use glass bead for blasting. Cleans up with Acetone or MEK.
- Sandblast using 120 grit aluminum oxide at 40lbs of pressure
- Degrease using KG-3 Solvent Degreaser (product 558855) and handle parts with gloves to avoid fingerprints and oil contamination
- Apply K-Phos Pretreatment for best results (product 112848)
- Preheat parts to be coated to about 120 degrees F.
- Using a good quality airbrush or spray gun, make light passes 8 to 10 inches away from the part.
- Spray four to five passes in different directions to gain complete coverage.
- After allowing the coating to dry, bake the part for 1 hour at 325 degrees.