DuraCoat's unique combination of chemical and water resistance, adhesion and abrasion resistance, hardness and impact resistance are legendary. Available in a complete list of colors to create your favorite camouflage finish. Finish can be applied to ferrous metals, alloys, synthetics, woods and more. No preheating or baking required unless desired. DuraCoat eliminates the problems typically found with many other heat cure finishes: Preheating and handling of hot parts, high curing temperatures, "orange-peel" and other inconsistencies caused by surface cooling or solvent evaporation during curing. Can be used to create special effects like texturing and shadowing. The dry film thickness can be varied from .25 to 1.5 ml. Additives such as prisms and flakes can also be used. DuraCoat needs to be applied with an airbrush, conventional automotive spray gun, High Volume Low Pressure (HVLP) system, or a Preval sprayer.
Before DuraCoat is applied, the firearm should be disassembled and cleaned thoroughly with a high quality degreaser. DuraCoat can be applied on bare metals, plastics, synthetics, and wood. DuraCoat has to be applied with an airbrush, conventional automotive spray gun, or an HVLP system. Finish will be resistant to most lubricants, cutting oils, and bore solvents. Finish can either air or oven dry. Includes hardener.