- Does not require proprietary tools for adjustment.
- Can be adjusted with your finger or a flat blade screwdriver.
- Lever can be configured to lock to the front or the rear.
- Superior clamping surface to insure maximum rail engagement.
The AD-RECON-SW mount is made for putting high power glass onto a flattop style AR-15 or bolt action rifle. This is a straight up mount with no forward offset. The rings are spaced farther apart to fit long tube scopes such as the Schmidt & Bender scopes. Also fits the US Optics TPAL Scopes equipped scopes. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock Lever system to accommodate both in spec and out of spec rail systems.
Material: 6061 T6 Aluminum
Finish: Matte Black
Distance Between Rings: 3.25"
Ring Height: (Center Line of Optic to Top of Base)
- Make sure your firearm is unloaded and the muzzle is pointed in a safe direction
- Familiarize yourself with the mount and it's parts
- Unlock the mount. To do this, depress the lock button and move the lever 180 degrees to the unlocked position
- Install assembly onto rail and move lever to the locked position
- Check tension to close. Correct tension is the maximum amount of tension you can apply with your hand to move the lever to the closed position. A little judgment and personal preference is needed here.
- To set the tension for the lever, turn the adjustment screw one click at a time until the proper feel is reached. To tighten, turn the screw clockwise. To loosen the tension, turn it counterclockwise. This may take a few tries to get it exactly where you want it.
- Torque Ring Screws to 20-25 in/lbs.