1st Generation amplifies light several thousand times. The image will generally be sharp in the center and slightly blurry around the edges, allowing wildlife observation or for general security use. A 1st generation will hum when on, it may continue to glow for some time after it is turned off, but is the least expensive type of night vision device.
2nd Generation has an extra process because a micro-channel plate is directly behind the photocathode tube and amplifies the light many times more than a 1st generation. The image is sharper and brighter.
CGT IIT Generation type of Image Intensifier tubes are engineered for significantly enhanced performance over current 2nd generation IITs. The CGT IIT is a Multi-Alkali compact 18mm format MCP Image Intensifier. Highlights of the CGT specifications are typical SNR of 16-22 and resolution of 45-54 lp/mm. CGT IITs are sensitive in a wide spectral band and thus provide good contrast in all scene circumstances.
HPT IIT Generation tubes are an upgrade of the CGT Generation tube. They are a Multi-Alkali compact 18mm format MCP Image Intensifier. The HPT tube increases sensitivity, resolution, Signal-to-Noise Ratio (SNR), and the Modulation Transfer Function (MTF). These improvements produce an exceptional image clarity and brightness. Most HPT specifications typically are equivalent to standard 3rd generation. Highlights of the HPT specifications are the typical SNR of 22 and resolution of 64 lp/mm.
3rd Generation has a chemical added to the photocathode and a film is added to increase tube life. These changes give excellent low light performance.
4th Generation does not use the film in the 3rd generation but uses a radically different way in which power is supplied to the unit. Image resolution is increased and there is a significant decrease in interference from bright light sources. Range is increased. The US Military does not use the 4th generation designation. These devices are referred to as "Filmless & Gated".
Regardless of generation, the image may have some black spots on it. These do not affect the performance or reliability of the device and should not be considered defects.